Identify Safety Inspection Points – Ladder Safety

All check points are numbered (Total 10, see picture here)

Below Answer are  Ladder Safety Inspection Points :-

 1 : Are Rung (Steps) Damaged or Missing?  (Broken, Crack, Deform, Bend)
2 : Are Side Rails Damaged ? (Broken, Crack, Deform, Bend)
3 : Are Rungs (cleats, or Step) fit into the Side Rails Without Damage (Loose)?
4 : Is Ledder Corroded ?
5 : Are Side Rails and Rungs (Steps) with Oil, Grease. Slippery Dirt etc.?
6 : Are Run s Uneven? (not placed at regular intervals – 30 cm gap between two rungs)
7 : Is Ladder Projected with Loose Nails, Screws, Bolts, or Other metal parts?
8 : Is Ladder placed at 65-75 degree angle? (1:4 ratio)
9 : Is Ladder extended at least 1 m above the landing platform? (3 Rungs)
10 : Is Ladder Secured either at Top or Bottom?
11 : Is Wooden Ladder Rung or Side Rails are Painted? (Should not be Painted)
12 : Is Ladder with makeshift arrangement -Steel rod used as Ladder Rung?
13 : Is Top Hook Damaged / Missing?
14 : Is Bottom Non-Skid Pad Damaged / Missing? (in case of Aluminium ladder)

• See list of EHS Toolbox Talks – Click Here
• Know more about EHS Toolbox Talks – Click Here
• Download Free Samples of EHS Toolbox Talk – Click Here
• Our technical team – Click here
• Valuable clients – Click Here
• Our contact details – Click here  

Akshar Management Consultant 
www.aksharqhse.in 
contact@aksharqhse.in
+91-999.8.999.690